How to Change Coil in Vape: A Clear and Confident Guide

Changing the coil in your vape is a necessary step in maintaining your device’s performance and ensuring that you have a satisfying vaping experience. A coil is a small heating element that is responsible for vaporizing the e-liquid and producing the flavor and vapor that you inhale. Over time, the coil will become less effective and may even burn out, resulting in a harsh, unpleasant taste. When this happens, it’s time to replace the coil.

Fortunately, changing the coil in your vape is a simple process that can be done in just a few steps. The specific steps will depend on the type of vape you have, but in general, you will need to disassemble the vape, remove the old coil, and replace it with a new one. It’s important to use the correct type of coil for your device, as using the wrong type can damage your vape or produce a poor vaping experience. In the following sections, we’ll provide you with some tips and guidelines for changing the coil in your vape, so you can keep your device running smoothly and enjoy your favorite e-juices to the fullest.

Understanding Vape Coils

What Are Vape Coils

Vape coils are the replaceable heating elements in vape devices that are responsible for heating up the e-liquid and turning it into vapor. They consist of a wire coil wrapped around an absorbent wick, usually made from cotton, that is saturated with e-liquid. When the device is activated, the battery sends power to the coil, which heats up and vaporizes the e-liquid.

There are different types of vape coils available, including single-coil, dual-coil, and mesh coils. Single-coil coils are the most common and are suitable for most vapers. Dual-coil and mesh coils are more advanced and are designed for vapers who want more vapor production and flavor.

Why Coils Need Changing

Vape coils need to be changed regularly because they eventually wear out and become less effective at heating up the e-liquid. When the coil is not working properly, you may experience a burnt taste or reduced vapor production. This is because the coil is not heating up the e-liquid evenly or efficiently.

The lifespan of a vape coil depends on several factors, including the type of coil, the frequency of use, and the type of e-liquid used. On average, a coil will last anywhere from one to three weeks before it needs to be replaced.

It’s important to change your vape coil regularly to ensure that you’re getting the best possible vaping experience. Not only will a new coil improve the flavor and vapor production of your device, but it will also prevent any potential health risks associated with using a worn-out coil.

In the next section, we’ll discuss how to know when it’s time to change your vape coil.

Identifying a Burnt Coil

If you’re experiencing a burnt taste when vaping, it’s likely that your coil is burnt out. Here are some signs that your coil may be burnt:

• Burnt taste: If you’re experiencing an acrid, burnt taste in your vape, it’s time to bid goodbye to your dead coil. A one-time hit off a burnt coil won’t have terrible consequences.
• Gurgling: Normally, vaping can produce a light popping, crackling, or hissing noise. But if it sounds similar to a kid blowing bubbles in his milk, you’ve got a problem. While several things can cause a gurgling vape, it often is symptomatic of a flooded coil.
• Leaking: If your vape is leaking, it could be a sign that your coil is burnt out. A burnt coil can cause the e-juice to leak out of the tank or pod.
• Less vapor: If you’re getting less vapor than usual, it could be a sign that your coil is burnt out. A burnt coil can’t heat the e-juice properly, which means that you won’t get as much vapor as you usually do.
• Discoloration: If you notice that your coil has turned black or brown, it’s a sign that it’s burnt out. A burnt coil can’t heat the e-juice properly, which can cause it to burn and discolor the coil.

If you’re experiencing any of these symptoms, it’s time to replace your coil. Don’t continue to use a burnt coil, as it can be harmful to your health and can ruin the taste of your e-juice.

Gathering Necessary Tools

Before you start changing the coil in your vape, you will need to gather some necessary tools. Here are the tools you will need:

1. Replacement Coil

The first and most important tool you will need is a replacement coil. Make sure you have the right type of coil for your vape device. Most vape coils are specific to the brand and model of the device. You can find replacement coils at your local vape shop or online.

2. Paper Towels

You will also need paper towels to clean your vape device and prevent any e-liquid from spilling. It’s important to have them handy before you start changing the coil.

3. Tweezers

Tweezers are useful for removing the old coil and placing the new one in the correct position. They can also help you remove any excess e-liquid from the tank.

4. Screwdriver

Some vape devices require a screwdriver to remove the old coil and install the new one. Check the user manual of your device to see if you need a screwdriver.

5. Vape Juice

You will also need vape juice to prime the new coil before using it. This will help prevent a dry hit and extend the life of the coil. Make sure you have the right type of vape juice for your device.

By gathering these necessary tools, you will be ready to change the coil in your vape device.

Removing the Old Coil

When it comes to changing the coil in your vape, the first step is to remove the old one. This can be a bit tricky, but with the right steps, it can be done in no time. Here are the steps you need to follow to remove the old coil from your vape:

Unscrewing the Tank

The first step is to unscrew the tank from the body of the vape to expose your coil. Every vape setup is slightly different, but in general, you can easily unscrew the tank from the bottom section. Hold the tank upside down and twist the tank off using your hands. Be sure to hold the tank over a paper towel or cloth to catch any excess e-liquid that may spill out.

Discarding the Burnt Coil

Once you have unscrewed the tank, you can then discard the burnt coil. Simply remove the coil from the tank using your fingers or a pair of tweezers. Be sure to dispose of the old coil properly, as it can be harmful to the environment.

If you are unsure how to dispose of your old coil, check with your local authorities for guidelines on how to dispose of electronic waste. Some vape shops may also have recycling programs in place, so be sure to check with them as well.

By following these simple steps, you can easily remove the old coil from your vape and get ready to install a new one. Remember to always handle your vape with care and follow all safety guidelines to ensure a safe and enjoyable vaping experience.

Installing the New Coil

When it’s time to install a new coil in your vape, there are a few things to keep in mind to ensure a smooth and successful installation process. Here are the steps you need to follow to install a new coil:

Choosing the Right Coil

Before you install a new coil, you need to make sure you choose the right one for your vape. Coils come in a variety of types and resistances, so it’s important to choose one that is compatible with your device. Check your device’s user manual or do some research online to find out which type of coil is best for your vape.

Priming the Coil

Once you have your new coil, you need to prime it before you install it. Priming the coil helps to ensure that it is properly saturated with e-juice, which can help to prevent dry hits and extend the life of the coil. To prime the coil, simply add a few drops of e-juice onto the exposed cotton wick and let it soak in for a few minutes.

Screwing in the New Coil

Once your new coil is primed, it’s time to install it. Start by unscrewing the old coil from the tank and disposing of it. Then, take your new coil and screw it into place in the tank. Be careful not to overtighten the coil, as this can damage the threads and cause leaks.

Once the new coil is securely in place, you can reassemble your vape and fill the tank with e-juice. Give the e-juice a few minutes to soak into the new coil before you start vaping. And that’s it – you’re ready to enjoy a fresh, flavorful vape experience!

Reassembling the Vape Device

Once you have replaced the vape coil, it’s time to reassemble your vape device. Follow these steps to put everything back together:

1. Take the new coil and screw it back into the base of the tank. Make sure it’s tightly secured.

2. Take the glass tank and slide it back over the base and the coil. Be careful not to break the glass in the process.

3. Screw the top cap back onto the tank. Make sure it’s tightly secured.

4. If your vape device has an adjustable airflow ring, slide it back onto the tank and adjust it to your preferred setting.

5. If your vape device has a removable drip tip, slide it back onto the top cap.

6. Finally, fill the tank with your preferred e-liquid. Make sure not to overfill it as this can cause leaks.

7. Screw the tank back onto the body of the vape device. Make sure it’s tightly secured.

Congratulations, you have successfully changed the coil and reassembled your vape device! It’s important to note that after changing the coil, you should let the device sit for a few minutes to allow the e-liquid to fully saturate the new coil before using it. This will prevent dry hits and burning the coil.

Testing the New Coil

Once you have replaced the old coil with a new one, it’s time to test it out. Here are a few things to keep in mind:

• Prime the coil: Before you start vaping, make sure to prime the new coil by saturating it with e-liquid. This will help prevent dry hits and ensure that the coil lasts longer.

• Start at a low wattage: To avoid burning out the coil, start at a low wattage and gradually increase it until you find the sweet spot. Refer to the manufacturer’s recommendations for the optimal wattage range for your coil.

• Take a few test puffs: Take a few short puffs to break in the coil and get a feel for the flavor and vapor production. You may notice a slight difference in taste and vapor compared to the old coil.

• Adjust as needed: If you’re not satisfied with the flavor or vapor production, adjust the wattage or airflow until you find the right balance. Keep in mind that different e-liquids may require different settings.

• Monitor the coil: Keep an eye on the coil and replace it when you start to notice a decrease in flavor or vapor production. Most coils last between one to two weeks, depending on usage and e-liquid composition.

By following these tips, you can ensure that your new coil is working properly and delivering the best possible vaping experience.

Maintaining Your Coil

To ensure the longevity of your coil and maintain the best possible vaping experience, it’s important to take proper care of your coil. Here are some tips for maintaining your coil:

Regular Cleaning

Cleaning your coil regularly can help prolong its lifespan and prevent any buildup of residue or debris. To clean your coil, you can take it apart and rinse it with warm water. You can also use a small brush to gently scrub away any buildup. Make sure to let the coil dry completely before reassembling it.

Avoiding Dry Hits

Dry hits occur when there is not enough e-liquid in the wick, causing the coil to burn. This can result in a burnt taste and damage to the coil. To avoid dry hits, make sure to keep your tank filled with e-liquid and avoid taking long drags. You can also prime your coil by saturating the wick with e-liquid before use.

In addition to regular cleaning and avoiding dry hits, it’s important to replace your coil when necessary. Signs that it’s time to change your coil include a burnt taste, decreased vapor production, and a gurgling sound. By taking proper care of your coil, you can ensure the best possible vaping experience and avoid any damage to your device.

Frequently Asked Questions

How often should you change your vape coil?

The frequency at which you should change your vape coil depends on how often you use your device. If you are a heavy vaper, you may need to change your coil every few days to a week. If you are a light vaper, you may be able to go a few weeks or even a month without changing your coil. Here is a helpful guide on how to know when to change your vape coil.

How can you tell when your vape coil needs to be replaced?

There are a few signs that your vape coil needs to be replaced. If you notice a burnt taste when you inhale, or if your vape starts producing less vapor than usual, it may be time to change your coil. Additionally, if you notice a gurgling sound when you take a hit, or if you see that your vape juice is leaking, these can also be signs that your coil needs to be replaced. Here are some more signs that your vape coil needs to be replaced.

What is the process for changing the coil in a SMOK Nord vape?

To change the coil in a SMOK Nord vape, first, remove the pod from the device. Next, remove the old coil by pulling it out of the pod. Then, insert the new coil into the pod, making sure that it is securely in place. Finally, reattach the pod to the device and fill it with vape juice. Here is a helpful video tutorial on how to change the coil in a SMOK Nord vape.

How do you change the coil in a Vaporesso vape?

To change the coil in a Vaporesso vape, first, remove the tank from the device. Then, unscrew the base of the tank and remove the old coil. Next, insert the new coil into the base of the tank, making sure that it is securely in place. Finally, reattach the base of the tank to the tank and fill it with vape juice. Here is a helpful video tutorial on how to change the coil in a Vaporesso vape.

Can you change the coil in a vape pod with juice still in the tank?

Yes, you can change the coil in a vape pod with juice still in the tank. However, it is recommended that you empty the tank before changing the coil to avoid any spillage or leakage. If you do choose to change the coil with juice still in the tank, be sure to hold the device upright and avoid tipping it over during the process.

What is the proper way to prime a new vape coil?

To prime a new vape coil, first, saturate the coil with vape juice by placing a few drops directly onto the cotton wick. Then, fill the tank with vape juice and let it sit for a few minutes to allow the coil to fully absorb the juice. Finally, take a few dry pulls without activating the device to help draw the juice into the coil. Here is a helpful video tutorial on how to prime a new vape coil.